Waterproof LED Flexible Strip Warm White IP65
    Product Highlights
    • Waterproof LED flexible strip IP65 provides high quality and homogeneous light suitable for wet locations.
    • Waterproof LED flexible strip IP65 is the perfect solution for wet location environments such as decks, architectural accents, cove, bar, cabinet, and landscape lighting.
    • Made with highly reflective white PCB surface and heat conductive 3M double adhesive VHB (Very High Bonding) tape.
    • Encapsulation material made of high quality polyurethane, resistant to heat, salt, solvents and acids.
    • High quality LED 3014 chips used with a rated power of 7.5 W/m with up to 560 lm/m.
    • LED pitch of 16 mm resulting in homogeneous light output. Smallest cuttable unit of 10 cm with 6 LEDs.
    • On board current control for constant light output and longer lifetime.
    • No UV or IR emissions.
    • CE and RoHS compliant.
    General Characteristics
    Product Code: LDSTR 7.5W/24V/WW/IP65
    Product Description: Waterproof LED Flexible Strip Warm White IP65
    Product Range: Waterproof LED Flexible Strip IP65
    Dimensions (LxWxH): 6000 mm x 10 mm x 5 mm
    Reel Length: 6 Meters
    Step Length: 100 mm
    LED Pitch: 16 mm
    LED Chip Type: SMD 3014
    Number of LEDs: 60 LEDs/m
    Rated Power: 7.5 W/m
    Operating Voltage: 24 VDC
    Operating Current Per Reel: 2.00 A
    Maximum Continuous Length: 10 meters
    LED Brand: N/A
    Average Lifetime: 30,000 Hours
    Operating Temperature Range: -30°C ... +40°C
    IP Protection: IP65
    Maximum Temperature TC: +50°C
    Light Characteristics
    Luminous Flux: 560 lm/m
    Efficacy: 75 lm/W
    Beam Angle: 120°
    Color: Warm White
    Color Temperature: 2900 K - 3100 K
    Color Rendering Index: > 80
    Mounting Advice
    • Feeding by soldering at the designated solder pads. Polarity (+/-) must be respected.
    • Maximum soldering duration must not exceed 10 seconds, and maximum soldering temperature must not exceed 260°C.
    • The PCB strip can be cut every 10 cm between the solder pads and the marked points by using a pair of scissors or similar.
    • Adhesive VHB (Very High Bonding) tape must be used on clean surfaces, free of oil, silicone and dirt particles.
    • Strip must be mounted on heat conductive surface for heat dissipation and extended lifetime.
    Security Advice
    • Only approved power supplies and dimmers can be used.
    • Only a skilled person is allowed to install the strip according to valid instructions and norms.
    • Be aware of ESD during mounting and installation.
    • Mechanical stress of the strip is to be avoided.
    • Not respecting the polarity will result in irreversible damage to the LED strip.