Underwater LED Flexible Strip Daylight IP68
    Product Highlights
    • Underwater LED flexible strip IP68 provides high quality and homogeneous light suitable for wet locations.
    • Underwater LED flexible strip IP68 is the perfect solution for wet location environments such as decks, architectural accents, cove, bar, cabinet, and landscape lighting.
    • Made with highly reflective white PCB surface.
    • Encapsulation material made of high quality polyurethane, resistant to heat, salt, solvents and acids.
    • High quality LED 3014 chips used with a rated power of 15w/m with up to 1340lm/m.
    • LED pitch of 8mm resulting in homogeneous light output. Smallest cuttable unit of 5cm with 6 LEDs.
    • On board current control for constant light output and longer lifetime.
    • No UV or IR emissions.
    • CE and RoHS compliant.
    General Characteristics
    Product Code: LDSTR 15W/24V/DL/IP68
    Product Description: Underwater LED Flexible Strip Daylight IP68
    Product Range: Underwater LED flexible strip IP68
    Dimensions (LxWxH): 6000 mm x 15 mm x 10 mm
    Reel Length: 6 Meters
    Step Length: 50 mm
    LED Pitch: 8 mm
    LED Chip Type: SMD 3014
    Number of LEDs: 120 LEDs/m
    Rated Power: 15 W/m
    Operating Voltage: 24 VDC
    Operating Current Per Reel: 4.20 A
    Maximum Continuous Length: 10 Meters
    LED Brand: N/A
    Average Lifetime: 30,000 Hours
    Operating Temperature Range: -30°C ... +40°C
    IP Protection: IP68
    Maximum Temperature TC: +50°C
    Light Characteristics
    Luminous Flux: 1340 lm/m
    Efficacy: 89 lm/W
    Beam Angle: 120°
    Color: Daylight
    Color Temperature: 6400 K - 6600 K
    Color Rendering Index: > 80
    Mounting Advice
    • Feeding by soldering at the designated solder pads. Polarity (+/-) must be respected.
    • Maximum soldering duration must not exceed 10 seconds, and maximum soldering temperature must not exceed 260°C.
    • The PCB strip can be cut every 5 cm between the solder pads and the marked points by using a pair of scissors or similar.
    • Adhesive VHB (Very High Bonding) tape must be used on clean surfaces, free of oil, silicone and dirt particles.
    • Strip must be mounted on heat conductive surface for heat dissipation and extended lifetime.
    Security Advice
    • Only approved power supplies and dimmers can be used.
    • Only a skilled person is allowed to install the strip according to valid instructions and norms.
    • Be aware of ESD during mounting and installation.
    • Mechanical stress of the strip is to be avoided.
    • Not respecting the polarity will result in irreversible damage to the LED strip.