Bare LED Flexible Strip G2 Blue IP20
    Product Highlights
    • Bare LED flexible strip provides high quality and homogeneous light in a low profile package
    • Bare LED flexible strip is the perfect solution for interior applications requiring high light output without sacrificing space in applications such as cove, display, architectural accents, cabinet, and backlighting
    • Made with highly reflective white PCB surface and heat conductive 3M double adhesive VHB (Very High Bonding) tape
    • High quality LED 2835 chips used with a rated power of 14.4 W/m
    • LED pitch of 14.3 mm resulting in homogeneous light output. Smallest cuttable unit of 10 cm with 7 LEDs
    • On board current control for constant light output and longer lifetime
    • No UV or IR emissions
    • CE and RoHS compliant
    General Characteristics
    Product Code: LDSTR G2 14.4W/24V/B/IP20
    Product Description: Bare LED Flexible Strip G2 Blue IP20
    Product Range: Bare LED Flexible Strip G2
    Dimensions (LxWxH): 6000 mm x 10 mm x 1.1 mm
    Reel Length: 6 Meters
    Step Length: 100 mm
    LED Pitch: 14.3 mm
    LED Chip Type: SMD 2835
    Number of LEDs: 70 LEDs/m
    Rated Power: 14.4 W/m
    Operating Voltage: 24 VDC
    Operating Current Per Reel: 4.20 A
    Maximum Continuous Length: 10 meters
    LED Brand: N/A
    Average Lifetime: 30,000 Hours
    Operating Temperature Range: -30°C ... +40°C
    IP Protection: IP20
    Maximum Temperature TC: +50°C
    Light Characteristics
    Luminous Flux: N/A
    Efficacy: N/A
    Beam Angle: 120°
    Color: Blue
    Color Temperature: N/A
    Color Rendering Index: > 80
    Mounting Advice
    • Feeding by soldering at the designated solder pads. Polarity (+/-) must be respected.
    • Maximum soldering duration must not exceed 10 seconds, and maximum soldering temperature must not exceed 260°C.
    • The PCB strip can be cut every 10 cm between the solder pads and the marked points by using a pair of scissors or similar.
    • Adhesive VHB (Very High Bonding) tape must be used on clean surfaces, free of oil, silicone and dirt particles.
    • Strip must be mounted on heat conductive surface for heat dissipation and extended lifetime.
    Security Advice
    • Only approved power supplies and dimmers can be used.
    • Only a skilled person is allowed to install the strip according to valid instructions and norms.
    • Be aware of ESD during mounting and installation.
    • Mechanical stress of the strip is to be avoided.
    • Not respecting the polarity will result in irreversible damage to the LED strip.