Products ~ Strips ~ Strip 7.5W/WW/IP20

Lamps
Strips
Strip 7.5W/GW/IP20
Strip 7.5W/WW/IP20
Strip 7.5W/NW/IP20
Strip 7.5W/DL/IP20
Strip 7.5W/GW/IP65
Strip 7.5W/WW/IP65
Strip 7.5W/NW/IP65
Strip 7.5W/DL/IP65
Strip 7.5W/GW/IP68
Strip 7.5W/WW/IP68
Strip 7.5W/NW/IP68
Strip 7.5W/DL/IP68
Strip 15W/GW/IP20
Strip 15W/WW/IP20
Strip 15W/NW/IP20
Strip 15W/DL/IP20
Strip 15W/GW/IP65
Strip 15W/WW/IP65
Strip 15W/NW/IP65
Strip 15W/DL/IP65
Strip 15W/GW/IP68
Strip 15W/WW/IP68
Strip 15W/NW/IP68
Strip 15W/DL/IP68
Strip 25W/GW/IP20
Strip 25W/WW/IP20
Strip 25W/NW/IP20
Strip 25W/DL/IP20
Strip 15W/RGB/IP65
Controllers
Spot Engines
LED Fixtures
LED Flexible Strip Warm White IP20
Product Highlights
  • LED flexible strip provides high quality and homogeneous light in a low profile package.
  • LED flexible strip is the perfect solution for interior applications requiring soft light output without sacrificing space in applications such as cove, display, architectural accents, cabinet, and backlighting.
  • Made with highly reflective white PCB surface and heat conductive 3M double adhesive VHB (Very High Bonding) tape.
  • High quality LED 3014 chips used with a rated power of 7.5w/m with up to 750lm/m.
  • LED pitch of 16mm resulting in homogeneous light output. Smallest cuttable unit of 10cm with 6 LEDs.
  • On board current control for constant light output and longer lifetime.
  • No UV or IR emissions.
  • CE and RoHS compliant.
General Characteristics
Product Code: LDSTR 7.5W/24V/WW/IP20
Product Description: LED Flexible Strip Warm White IP20
Product Range: LED Flexible Strip
Dimensions (LxWxH): 6,000mm x 10mm x 2mm
Reel Length: 6 Meters
Step Length: 100 mm
LED Pitch: 16 mm
LED Chip Type: SMD 3014
Number of LEDs: 60 LEDs/m
Rated Power: 7.5 w/m
Operating Voltage: 24 VDC
Operating Current Per Reel: 2.00 A
Maximum Continuous Length: 10 meters
Operating Temperature Range: -30° .. +40°
Maximum Temperature TC: +50°
Light Characteristics
Luminous Flux: 600 lm/m
Efficacy: 80 lm/w
Beam Angle: 120°
Color: Warm White
Color Temperature: 2,900 K - 3,100 K
Color Rendering Index: > 80
Mounting Advice
  • Feeding by soldering at the designated solder pads. Polarity (+/-) must be respected.
  • Maximum soldering duration must not exceed 10 seconds, and maximum soldering temperature must not exceed 260°C.
  • The PCB strip can be cut every 10cm between the solder pads and the marked points by using a pair of scissors or similar.
  • Adhesive VHB (Very High Bonding) tape must be used on clean surfaces, free of oil, silicone and dirt particles.
  • Strip must be mounted on heat conductive surface for heat dissipation and extended lifetime.
Security Advice
  • Only approved power supplies and dimmers can be used.
  • Only a skilled person is allowed to install the strip according to valid instructions and norms.
  • Be aware of ESD during mounting and installation.
  • Mechanical stress of the strip is to be avoided.
  • Not respecting the polarity will result in irreversible damage to the LED strip.
Copyright © Creo Light
Home|Products|Resources|About Us|Contact
Designed, Developed, and Hosted by Universant Technology Corporation s.a.l.