Products ~ Strips ~ Strip 7.5W/GW/IP65

Strip 7.5W/GW/IP20
Strip 7.5W/WW/IP20
Strip 7.5W/NW/IP20
Strip 7.5W/DL/IP20
Strip 7.5W/GW/IP65
Strip 7.5W/WW/IP65
Strip 7.5W/NW/IP65
Strip 7.5W/DL/IP65
Strip 7.5W/GW/IP68
Strip 7.5W/WW/IP68
Strip 7.5W/NW/IP68
Strip 7.5W/DL/IP68
Strip 15W/GW/IP20
Strip 15W/WW/IP20
Strip 15W/NW/IP20
Strip 15W/DL/IP20
Strip 15W/GW/IP65
Strip 15W/WW/IP65
Strip 15W/NW/IP65
Strip 15W/DL/IP65
Strip 15W/GW/IP68
Strip 15W/WW/IP68
Strip 15W/NW/IP68
Strip 15W/DL/IP68
Strip 25W/GW/IP20
Strip 25W/WW/IP20
Strip 25W/NW/IP20
Strip 25W/DL/IP20
Strip 15W/RGB/IP65
Spot Engines
LED Fixtures
LED Flexible Strip Gold White IP65
Product Highlights
<ul> <li> LED flexible strip IP65 provides high quality and homogeneous light suitable for wet locations.</li> <li> LED flexible strip IP65 is the perfect solution for wet location environments such as decks, architectural accents, cove, bar, cabinet, and landscape lighting.</li> <li> Made with highly reflective white PCB surface and heat conductive 3M double adhesive VHB (Very High Bonding) tape.</li> <li> Encapsulation material made of high quality polyurethane, resistant to heat, salt, solvents and acids.</li> <li> High quality LED 3014 chips used with a rated power of 7.5w/m with up to 700lm/m.</li> <li> LED pitch of 16mm resulting in homogeneous light output. Smallest cuttable unit of 10cm with 6 LEDs.</li> <li> On board current control for constant light output and longer lifetime.</li> <li> No UV or IR emissions.</li> <li> CE and RoHS compliant.</li> </ul>
General Characteristics
Product Code: LDSTR 7.5W/24V/GW/IP65
Product Description: LED Flexible Strip Gold White IP65
Product Range: LED Flexible Strip IP65
Dimensions (LxWxH): 6,000mm x 10mm x 5mm
Reel Length: 6 Meters
Step Length: 100 mm
LED Pitch: 16 mm
LED Chip Type: SMD 3014
Number of LEDs: 60 LEDs/m
Rated Power: 7.5 w/m
Operating Voltage: 24 VDC
Operating Current Per Reel: 2.00 A
Maximum Continuous Length: 10 meters
Operating Temperature Range: -30° .. +40°
Maximum Temperature TC: +50°
Light Characteristics
Luminous Flux: 550 lm/m
Efficacy: 73 lm/w
Beam Angle: 120°
Color: Gold White
Color Temperature: 2,600 K - 2,800 K
Color Rendering Index: > 80
Mounting Advice
<ul> <li> Feeding by soldering at the designated solder pads. Polarity (+/-) must be respected.</li> <li> Maximum soldering duration must not exceed 10 seconds, and maximum soldering temperature must not exceed 260&deg;C.</li> <li> The PCB strip can be cut every 10cm between the solder pads and the marked points by using a pair of scissors or similar.</li> <li> Adhesive VHB (Very High Bonding) tape must be used on clean surfaces, free of oil, silicone and dirt particles.</li> <li> Strip must be mounted on heat conductive surface for heat dissipation and extended lifetime.</li> </ul>
Security Advice
<ul> <li> Only approved power supplies and dimmers can be used.</li> <li> Only a skilled person is allowed to install the strip according to valid instructions and norms.</li> <li> Be aware of ESD during mounting and installation.</li> <li> Mechanical stress of the strip is to be avoided.</li> <li> Not respecting the polarity will result in irreversible damage to the LED strip.</li> </ul>
Copyright © Creo Light
Home|Products|Resources|About Us|Contact
Designed, Developed, and Hosted by Universant Technology Corporation s.a.l.